During the intense summer months in Egypt, compressed air stations face harsh operating conditions. Ambient temperatures in compressor rooms routinely exceed 45°C without adequate cross-ventilation, leading to thermal trips and costly production stoppages.
Key Summer Inspection Points:
- Oil Cooler Cleanliness: Dust, desert sand, and lint quickly clog external aluminum cooler fins. Clean coolers with compressed air or non-corrosive foaming cleaners monthly.
- Thermostatic Valve Inspection: Ensure the thermal bypass valve opens properly at 71°C/83°C to direct hot oil through the cooler.
- Synthetic Oil Degradation: Mineral oils oxidize rapidly above 90°C. Upgrading to genuine ALUP FluidTech synthetic lubricant preserves viscosity and extends oil life to 4,000–8,000 operational hours.
- Condensate Drain Testing: Higher ambient temperatures mean air holds drastically more moisture. Check that electronic zero-loss drains on your ADQ dryers and receiver tanks are discharging freely without backing up moisture into factory air headers.
Flowva Air offers proactive preventative maintenance contracts with genuine ALUP service kits to guarantee uninterrupted summer production.
